Key Important Game Stats for Basketball and American Football

In basketball, a team needs to make at least 45% of their field goal attempts to be considered above average. This is a key benchmark for success in the sport.

The NBA average for field goal percentage is around 44.5%. This shows that teams that shoot above this mark are performing better than average.

For American football, a quarterback's passer rating is a crucial stat. It's calculated by adding up their completions, attempts, and touchdowns, then subtracting their interceptions.

Basketball is a high-scoring game. The average points scored per game in the NBA is 110.3.

A key factor in basketball is shooting percentage. The highest shooting percentage in NBA history is 64.9%, held by Steve Kerr.

Free throws are a crucial aspect of basketball. The record for most free throws made in a single season is 446, set by Stephen Curry.

In basketball, teamwork is essential. The team with the highest winning percentage in NBA history is the San Antonio Spurs, with a 0.652 winning percentage.

The three-point shot is a game-changer. The record for most three-pointers made in a single season is 402, set by Stephen Curry.

American Football is an electrifying sport that fans and bettors eagerly await. The upcoming season promises the greatest game of the year.

The event creates an anticipation that builds excitement among viewers. This is evident in the statistics provided by STATSCORE, which offer essential insights into the game.

The American football season is a time for fans to come together and enjoy the game. With STATSCORE's statistics, you'll be ready for the action-packed matches ahead.

Rushing is a crucial aspect of American Football, and the numbers don't lie. Jonathan Taylor led the pack with 161 attempts, followed closely by Anthony Richardson with 61 attempts.

Taylor's impressive 708 yards earned him a 4.4 yards per attempt average, while Richardson's 335 yards translated to a 5.5 yards per attempt average. It's clear that both players were able to make the most of their rushing opportunities.

Trey Sermon's 47 attempts resulted in 131 yards, giving him a 2.8 yards per attempt average. This is a stark contrast to Taylor's average, highlighting the importance of consistent performance on the field.

Tyler Goodson's 27 attempts netted him 128 yards, a respectable 4.7 yards per attempt average. His longest rush of the season was 33 yards, showcasing his ability to break through the defense.

Joe Flacco's limited 8 attempts only yielded 25 yards, resulting in a 3.1 yards per attempt average. Ashton Dulin's 5 attempts, on the other hand, produced 45 yards, giving him a 9 yards per attempt average - an impressive feat.

Here's a breakdown of the rushing stats for the players mentioned:

Punting is a crucial aspect of American Football, and it's not just about kicking the ball away. Rigoberto Sanchez, for instance, has been quite effective in this department, with 52 punts under his belt.

He's also managed to pin the opposing team deep in their own territory, with 22 punts resulting in returns of 65 yards or more. In fact, Sanchez has a long of 65 yards, which is a significant achievement.

Sanchez's average punt distance is 50 yards, which is a respectable figure. His punts have also been relatively unblocked, with none of them being returned for touchdowns.

Here are some key statistics for Sanchez's punting:

Sanchez's punting average is 43.9 yards, which is a testament to his accuracy and control.

In American football, punt return is a crucial aspect of the game, and the numbers can be quite impressive. Josh Downs led the pack with 16 punt returns.

He averaged a respectable 10.1 yards per return, which is a testament to his speed and agility on the field. His longest punt return was 23 yards, a notable achievement.

Anthony Gould, on the other hand, had a more limited opportunity with just 1 punt return. However, he still managed to average 19 yards per return, showcasing his potential as a punt return specialist.

Here's a breakdown of the punt return statistics for these two players:

Poker stats can be a game-changer for players who want to gain an edge in poker games. To access poker stats, you'll need to have poker tracking software installed and running on your device while playing.

Some online poker operators allow the use of such software, while others offer integrated stats in the poker platform itself. This means you can either use third-party software like PokerTracker or Hold'em Manager, or rely on the built-in stats provided by the poker site.

Having a big sample size of hands played against a particular player is key to getting relevant and descriptive poker stats.

VPIP, or Voluntarily Put Into Pot, is a crucial poker stat that reveals how often a player invests money into the pot beyond the blinds and antes.

A VPIP of 25% in a 6-handed game is a good benchmark for a solid player. Players with VPIP significantly higher or lower than this are likely playing sub-optimally.

Anytime a player calls or raises before the flop, their VPIP goes up, and anytime they fold, it goes down. This stat helps you quickly determine if a player is too loose or too tight without needing to remember specific hands.

PFR measures preflop aggression and is a crucial stat to have displayed in your HUD. A player's PFR goes up anytime they make a raise before the flop, including 3-bets and 4-bets.

A player's PFR tells you a lot about their preflop tendencies and poker skills. An extremely low or high PFR typically describes a fairly bad poker player.

A player playing 25 VPIP should have a PFR of around 18, which is considered optimal for 6-max poker games. If you notice a player with an extremely low PFR, like 8, they're guaranteed to be a calling station.

A calling station only raises 8% of the time, while the other 92% of the time they either fold or call. If you combine a player's VPIP with their PFR, you'll get to the bottom of their overall playing style.

If a player plays 42/8 (VPIP/PFR), you'll be able to easily fold to their raises or 3-bets, as they only ever raise with the very best poker hands out there.

An AF of 3 is considered normal in today's poker games.

This is a benchmark that many players strive for, but it's essential to understand that it's not a one-size-fits-all solution.

The aggression factor is calculated by dividing all aggressive actions by all passive actions, such as calls.

This stat takes into account every betting street from preflop to the river, giving you a comprehensive view of a player's overall aggression level.

If you see a player with an AF much higher than 3, they're likely a maniac, while one with a significantly lower AF may not be bluffing enough or betting for value often enough.

This can give you an edge, allowing you to exploit their play and make more informed decisions at the table.

A player with an AF of 3 is not necessarily aggressive, but rather balanced in their playing style.

This balance is key to success in poker, as it allows you to mix up your play and keep your opponents guessing.

By understanding the aggression factor, you can gain valuable insights into a player's tendencies and make more effective decisions at the table.

ATS is a poker stat that helps you understand how often an opponent tries to steal the blinds, especially in late position.

This stat is similar to PFR, but it only accounts for raises from late position, making it typically higher than PFR.

In full ring games, good regulars usually have an ATS of 30, while in 6-max games it's around 35.

Checking a player's ATS can help you decide whether to defend or fold when they raise in late position.

A high ATS gives you more reason to play back at the raiser, while a low one lets you fold more hands without worrying about getting exploited.

A solid player will usually fold to c-bets about 60% of the time. This means that if you're facing a strong opponent, you can expect them to fold to your continuation bets most of the time.

Weak players, on the other hand, will fold way more often to c-bets, often above 80%. This is because they tend to make impulsive decisions and are more likely to fold to pressure.

Having a good understanding of how your opponents fold to c-bets can help you adjust your strategy and make more informed decisions at the table.

A player's 3-bet percentage is a key poker stat to be aware of. It can tell you a lot about their playing style and how to exploit them.

Competent players 3-bet between 5% and 10% of the time, depending on the game format, stack depths, positions, and more. This range is a good benchmark to keep in mind when evaluating a player's 3-bet percentage.

Playing against a player with a 3-bet percentage of 15% can be a red flag, as it suggests they bluff too much or 3-bet too many hands for value. This can be a great opportunity to exploit them with 4-bet bluffing and calling with more hands.

A solid player will usually c-bet around 70% of the time, making it a good idea to be aware of how often your opponent c-bets after opening the pot.

If you notice an opponent c-betting very low, around 20%, it's likely they're a weak player, and you can take advantage of this by folding to their c-bets more often.

A player who c-bets 80% or more is probably a solid player, and you can bluff or defend against their c-bets more often.

Having a player with a high Fold to C-Bet stat, around 80%, means they're more likely to fold to your c-bets, so you can adjust your c-betting frequencies and sizes accordingly.

On the other hand, a player with a low Fold to C-Bet stat, around 40%, is likely to call more often, so you should c-bet for value less often.